Requirements:
Make sure that not to cut the two wires inside.
In the plug the small loosened screws can be visible.
After attaching tighten each screw securely.
Step1: Cut off the damaged plug:
Step2:Strip 1/2 inch of insulation from the end of each wire with screw driver:
Make sure that not to cut the two wires inside.
Step3:Open the replacement plug and attach each copper wire to each terminal:
In the plug the small loosened screws can be visible.
Step4:Attach each of cooper wire and reassemble the replacement plug:
After attaching tighten each screw securely.
Step7:To check if cord is working properly, plug it into a three-prong receptable and switch on.
0 comments: